› Should we seek further improvement of fluid film bearings - what for and how? - Michał Wasilczuk, Faculty of Mechanical Engineering, Gdańsk University of Technology
09:00-09:40 (40min)
› Analysis of the risk of thermally induced seizure in narrow circumferential groove journal bearings using a robust simple theoretical approach - Alex-Florian Cristea, Tecnitas, Mircea D. Pascovici, University Politehnica Bucharest, Jean Bouyer and Michel Fillon, Institut Pprime
10:15-10:45 (30min)
› Compressor rub verified by rotating phase symptoms - Nicolas Péton, Guillaume Christin, Charles Grislin, GE Energy Measurement & Control
10:15-10:45 (30min)
› Improvement of dynamic performance of hybrid gas bearings via adjustable lubrication - Fabian Pierart Vasquez, Ilmar Santos, Technical University of Denmark
10:15-10:45 (30min)
› Influence de la température et de la conicité sur les performances d'un palier hydrodynamique conique - Ajay Kumar Gangrade, Vikas M. Phalle, VJTI, Department of Mechanical Engineering, Mumbai
10:15-10:45 (30min)
› Instrumentation Routing Design on Journal Bearings & Thrust Bearings - Anil Kumar Chippa, GE India Technology Center, Salvatore Costaglioa, GE Oil & Gas NuovoPignone, Ramesh Kammalapalli, GE India Technology Center
10:15-10:45 (30min)
› Numerical modeling of dynamic behavior of a tilting pads thrust bearing and a journal bearing with helical grooves - Sébastien DENIS, EDF - Division Technique Générale, Mihai Arghir, Institut Pprime
10:15-10:45 (30min)
› ON INCIPIENCE OF CAVITATION AND ITS INHERENT TIME DEPENDENCE - Bhavesh Kachhia, INSA de Lyon LaMCoS, Coda Pan, Global Technology, Daniel Nelias, INSA de Lyon LaMCoS
10:15-10:45 (30min)
› Testing of Bearing Materials for Large Two-stroke Marine Diesel Engines - Peder Klit, DTU, Sebastian Persson, Anders Vølund, MAN Diesel & Turbo
10:15-10:45 (30min)
› The role of lubricant feeding conditions on the performance improvement and friction reduction of journal bearings - Francisco P. Brito, CT2M, Universidade do Minho, Instituto Superior de Engenharia do Porto - Michel Fillon, Institut Pprime, Lucrecio M. Costa, Ministry of Energy and Water/DNAAS, Luanda - José Carlos P. Claro and Antonio S. Miranda, CT2M, Universidade do Minho
10:15-10:45 (30min)
› Decrease axial vibration generator with balancing - Guillaume Christin, Nicolas Péton, GE Measurement & Control Solutions
10:45-11:15 (30min)
› Experimental study of improved fluid-film bearing design for a high-speed turbocharger - Gordon Kirk, Virginia Polytechnic Institute and State University
11:15-11:45 (30min)
› Réduction de la température d'huile dans les paliers de turbomachines opérant à grandes vitesses - Thilo Koch, Abdelhakim Laabid, Zollern BHW
11:45-12:15 (30min)
› Highly Loaded Bearings Equipping Gears of Turbo-compressors: Behavior in Oil & Gas Operations Through Different Applications and Different Designs. Does the Smart Bearing Design Meet the Production Requirements? - Dominique Orhon, TOTAL Exploration & Production
14:30-15:00 (30min)
› Performance Characteristics of Artificially Textured Water Lubricated Journal Bearings - Dimitrios Bompos, Pantelis Nikolakopoulos, University of Patras, Department of Mechanical Engineering & Aeronautics
15:00-15:30 (30min)
› Effect of Oil-Circuit Contamination on the Functioning of Surface-Textured Journal Bearings – An Experimental Investigation - Azzedine Dadouche, Martin J. Conlon, National Research Council Canada
15:30-16:00 (30min)
› Simplified approach to predict sensitivity factors for small end conrod of sport car engines - Adrien Stievenard, EPFL Dept of Mechanics and Jean-Louis Ligier, HEIG-VD Comatec-co
16:45-17:15 (30min)
› Computational Investigation of Thermoelastohydrodynamic (TEHD) Lubrication in a Textured Sector-Pad Thrust Bearing - Anastasis Charitopoulos, Dimitris Fouflias, Christos Papadopoulos, Lambros Kaiktsis, National Technical University of Athens and Michel Fillon, Institut Pprime
17:15-17:45 (30min)
› Effect of Coating Material Properties on Tilting-pad Thrust Bearing Performance - Michał Wodtke, Michal Wasilczuk, Faculty of Mechanical Engineering, Gdańsk University of Technology
17:45-18:15 (30min)
› Adjustable ETHD lubrication applied to the improvement of dynamic performance of flexible rotors supported by active TPJB - Jorge Gonzales, Alejandro Cerda, Ilmar Santos, Technical University of Denmark
08:00-08:30 (30min)
› Measured Displacement Coefficients of an Adjustable Hydrodynamic Journal Rotor Bearing - Keith Martin, Open University
08:30-09:00 (30min)
› Application of large hydrodynamic R1T pocket bearings Ø 900 mm in a large half-speed steam turbine generator - Josef Huster, Ph. Peel, D. Demailly, ALSTOM Power AG
09:00-09:30 (30min)
› A parametric study of a porous self-circulating hydrodynamic bearing - Minel Jack Braun, University of Akron, Dept of Mechanical Engineering
09:30-10:00 (30min)
› Implementation of the tapered tilting pad thrust bearing design in a high speed PSP hydro generator - Piotr Pajaczkowski, Andreas Schubert, ALSTOM Hydro
10:30-11:00 (30min)
› Mass-conserving simulation of friction reduction in a hydrodynamic textured thrust bearing - Hugo Checo, Instituto de Ciências Matemáticas e de Computação, Mohammed Jai, INSA de Lyon, Jean-Paul Cadalen, Franck Choukroun, Gustavo Buscaglia, Renault
10:55-11:30 (35min)
› Contribution of textures to the hydrodynamic effect on parallel surface thrust bearings during the start-up period - Yann Henry, Jean Bouyer, Michel Fillon, Institut Pprime
11:30-12:00 (30min)
› Solutions for increasing the bearing capacity of thrust bearings - Vasyl Martsynkovskyy, Volodymyr Yurko, TRIZ
12:00-12:30 (30min)
› Investigation of unusual performance fluctuations in a tilting pad journal bearing application - Scan DeCamillo, Kingsbury, Inc.
14:30-15:00 (30min)
› Categories of Impact of Bearing Damage on Hydrodynamic Film Operation - Lyke Branagan, Pioneer Motor Bearing Company
15:00-15:30 (30min)
› Impact de la présence de rayures dans les paliers à patins oscillants - Influence des caractéristiques géométriques des rayures - Mathieu Hélène, Jérôme Beaurain, Xavier Raud, EDF R&D and Michel Fillon, Institut Pprime
15:30-16:00 (30min)
Amphi IFMI
